10 material differences · fewer than 12
Tractor oneFord 8461988–1993No measured PTO figureTractor twoInternational Harvester 73881981No measured PTO figure
Which should you choose?
Read our verdict on the 846 and the 7388 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 846 | 7388 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 229.9 hp | 229.9 hp | — |
| Engine declared | CUMMINS LT 10-A 230 | INTERNATIONAL HARVESTER DTI-466 | differs |
| Displacement declared | 10.00 L | 7.64 L | +31% 846 |
| Maximum torque declared | 749 lb·ft · 1,015 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 7388 |
| Clutch declared | — | Pedal-operated dry double-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 25.2 gpm · 95.4 L/min | 16.0 gpm · 60.6 L/min | +57% 846 |
| Rear PTO speeds declared | 1000 rpm | — | — |
| Weight & dimensions | |||
| Unladen weight declared | 23,049 lb · 10,455 kg | 19,500 lb · 8,845 kg | +18% 846 |
| Maximum permissible mass declared | 28,058 lb · 12,727 kg | — | — |
| Wheelbase declared | 130.0 in · 3,302 mm | 118.0 in · 2,997 mm | +10% 846 |
| Length declared | 260.0 in · 6,604 mm | 246.0 in · 6,248 mm | +6% 846 |
| Width declared | 124.0 in · 3,150 mm | 116.0 in · 2,946 mm | +7% 846 |
| Ground clearance declared | 16.1 in · 410 mm | 12.9 in · 328 mm | +25% 846 |
| Fuel tank declared | 985.9 qt · 933.0 L | 775.9 qt · 734.3 L | +27% 846 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 846 sources
Source
- Source: Traktorenlexikon, “Ford Ford 846”
International Harvester 7388 sources
Source
- Source: Traktorenlexikon, “IHC 7388”
- Source: Traktorenlexikon, “IHC 4386”