10 material differences · fewer than 12

Tractor oneFord 8240 (A)1991–1997No measured PTO figureTractor twoSAME Antares II 1101996–2000No measured PTO figure

Which should you choose?

Read our verdict on the 8240 (A) and the Antares II 110 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Ford 8240 (A) and SAME Antares II 110, field by field
Field	8240 (A)	Antares II 110	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	FORD-POWERSTAR TA 456 CID-NA	SAME 1000.6 A	differs
Displacement declared	7.48 L	6.00 L	+25% 8240 (A)
Maximum torque declared	322 lb·ft · 436 N·m	278 lb·ft · 377 N·m	+16% 8240 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal operated dry single disc clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	21.1 gpm · 80.0 L/min	15.2 gpm · 57.5 L/min	+39% 8240 (A)
Pressure declared	2,582 psi · 178 bar	2,176 psi · 150 bar	+19% 8240 (A)
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	9,824 lb · 4,456 kg	10,251 lb · 4,650 kg	—
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	105.9 in · 2,690 mm	108.3 in · 2,750 mm	—
Length declared	171.7 in · 4,361 mm	180.7 in · 4,590 mm	—
Width declared	82.5–107.6 in · 2,095–2,733 mm	87.4–107.1 in · 2,220–2,720 mm	differs
Height, over the cab declared	108.9 in · 2,766 mm	110.4 in · 2,805 mm	—
Ground clearance declared	26.4 in · 670 mm	17.7 in · 450 mm	+49% 8240 (A)
Turning radius, braked declared	—	12.0 ft · 3.65 m	—
Fuel tank declared	240.0 qt · 227.1 L	253.6 qt · 240.0 L	+6% Antares II 110

Source

Source