Ford 801 Powermaster or Lamborghini R-603 (DT)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 801 Powermaster has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-603 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Lamborghini R-603 (DT) suits loader and hydraulic implement work better on this data: 23% (3.5 L/min / 0.9 gpm) more hydraulic flow.
- The Lamborghini R-603 (DT) suits heavy draft work (ploughing, cultivating) better on this data: 20% (319 kg / 703 lb) heavier and four-wheel drive.
- The Ford 801 Powermaster suits road haulage better on this data: 12% (3.0 km/h / 1.9 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 801 Powermaster | R-603 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 41.4 kW (55.5 hp)Traktorenlexikon, “Ford 801” | 41.2 kW (55.3 hp)Traktorenlexikon, “Lamborghini R 603 DT” | Not comparableNot comparable on power at the PTO shaft: the 801 Powermaster has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-603 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 801 Powermaster and the R-603 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 801 Powermaster and the R-603 (DT). |
| Which pumps more oil for implements? | 15.0 L/min (4.0 gpm)Traktorenlexikon, “Ford 801” | 18.5 L/min (4.9 gpm)Traktorenlexikon, “Lamborghini R 603 DT” | AheadThe Lamborghini R-603 (DT) has 23% more hydraulic flow (3.5 L/min / 0.9 gpm) than the Ford 801 Powermaster (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 567 kg (1,250 lb)Traktorenlexikon, “Ford 801” | — | No figureNo call on three-point lift: no figure on record for the R-603 (DT). |
| Which is heavier, for traction? | 1,581 kg (3,486 lb)Traktorenlexikon, “Ford 801” | 1,900 kg (4,189 lb)Traktorenlexikon, “Lamborghini R 603 DT” | Ahead (a fact, not an advantage)The Lamborghini R-603 (DT) is 20% heavier (319 kg / 703 lb) than the Ford 801 Powermaster (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 801 Powermaster and the R-603 (DT). |
| Which has the wider choice of gears? | 4 to 12Traktorenlexikon, “Ford 801” | 12Traktorenlexikon, “Lamborghini R 603 DT” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 801 Powermaster and the R-603 (DT). |
| Which is faster on the road? | 28 km/h (17.4 mph)Traktorenlexikon, “Ford 801” | 25 km/h (15.5 mph)Traktorenlexikon, “Lamborghini R 603 DT” | AheadThe Ford 801 Powermaster has 12% more top speed (3.0 km/h / 1.9 mph) than the Lamborghini R-603 (DT) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Ford 801” | 540 rpmTraktorenlexikon, “Lamborghini R 603 DT” | AheadThe Ford 801 Powermaster offers 1000 rpm at the PTO, which the Lamborghini R-603 (DT) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 801 Powermaster and the R-603 (DT). |
| Which drives on both axles? | 2WDTraktorenlexikon, “Ford 801” | Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini R 603 DT” | AheadThe Lamborghini R-603 (DT) is available with four-wheel drive; the Ford 801 Powermaster is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1958–1962 | 1973–1982 | Ahead (a fact, not an advantage)The Lamborghini R-603 (DT) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Lamborghini R-603 (DT) has 23% more hydraulic flow (3.5 L/min / 0.9 gpm) than the Ford 801 Powermaster (both pump flow, as stated by the source).
- The Lamborghini R-603 (DT) is 20% heavier (319 kg / 703 lb) than the Ford 801 Powermaster (both unladen weight, as stated by the source).
- The Ford 801 Powermaster has 12% more top speed (3.0 km/h / 1.9 mph) than the Lamborghini R-603 (DT) (both top speed forward, as stated by the source).
- The Ford 801 Powermaster offers 1000 rpm at the PTO, which the Lamborghini R-603 (DT) does not (as stated by the sources).
- The Lamborghini R-603 (DT) is available with four-wheel drive; the Ford 801 Powermaster is two-wheel drive (as stated by the sources).
- The Lamborghini R-603 (DT) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Not comparable on power at the PTO shaft: the 801 Powermaster has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-603 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources