7 material differences · fewer than 12

Tractor oneFord 8601954–1957No measured PTO figureTractor twoURSUS C-451947–1959No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (158%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

7 material differences · 1 fields identical or within 5%, which is not counted as material

Ford 860 and URSUS C-45, field by field
Field860C-45Gap
Engine
Engine power, claimed claimed44.4 hp44 hp—
Transmission
Top speed declared12.4 mph · 20 km/h3.9–10.4 mph · 6.2–16.7 km/hdiffers
Clutch declared—Mechanically-operated dry double-plate clutch, mounted on the right journal of the crankshaft—
Hydraulics & hitch
Pump flow declared2.7–6.0 gpm · 10.2–22.7 L/min——
Rear PTO speeds declared540 rpm630differs
Weight & dimensions
Unladen weight declared3,210 lb · 1,456 kg8,267–8,433 lb · 3,750–3,825 kgdiffers
Wheelbase declared74.5 in · 1,892 mm80.1 in · 2,035 mm+8% C-45
Length declared121.8 in · 3,094 mm——
Width declared63.9–87.5 in · 1,623–2,223 mm70.9 in · 1,800 mmdiffers
Ground clearance declared21.0 in · 533 mm8.7 in · 220 mm+142% 860
Turning radius, braked declared18.0 ft · 5.49 m——
Fuel tank declared67.2 qt · 63.6 L100.4 qt · 95.0 L+49% C-45

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Ford 860 sources

Source
  • Source: Traktorenlexikon, “Ford 800”

URSUS C-45 sources

Source
  • Source: Wikipedia (pl): Ursus C-45 (open data)
  • Source: Traktorenlexikon, “Ursus C-45”