13 material differences

Tractor oneFord 7840 (A)1991–1998No measured PTO figureTractor twoHürlimann H-468 "Prestige"1989–1998No measured PTO figure

Which should you choose?

Read our verdict on the 7840 (A) and the H-468 "Prestige" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 1 fields identical or within 5%, which is not counted as material

Ford 7840 (A) and Hürlimann H-468 "Prestige", field by field
Field7840 (A)H-468 "Prestige"Gap
Engine
Engine power, claimed claimed98.6 hp98.6 hp—
Engine declaredFORD-POWERSTAR GA 401 CID-NAHürlimann H-1000.4 Wdiffers
Displacement declared6.58 L4.00 L+65% 7840 (A)
Maximum torque declared279 lb·ft · 378 N·m182 lb·ft · 247 N·m+53% 7840 (A)
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6 mph · 30 km/hdiffers
Clutch declaredPedal-operated, self-adjusting dry AP single-disc clutchpedal-operated dry SLH single disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Hydraulic control declared—Load sensing—
Pump flow declared9.6 gpm · 36.4 L/min——
Pressure declared2,857 psi · 197 bar2,611 psi · 180 bar+9% 7840 (A)
Rear PTO speeds declared540 rpm / 1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared9,348 lb · 4,240 kg6,790 lb · 3,080 kg+38% 7840 (A)
Wheelbase declared105.9 in · 2,690 mm90.2 in · 2,290 mm+17% 7840 (A)
Length declared171.7 in · 4,361 mm157.1 in · 3,990 mm+9% 7840 (A)
Width declared82.5–101.6 in · 2,095–2,581 mm77.6–101.2 in · 1,970–2,570 mmdiffers
Ground clearance declared18.0 in · 456 mm16.1 in · 410 mm+11% 7840 (A)
Turning radius, braked declared—12.3 ft · 3.76 m—
Fuel tank declared240.0 qt · 227.1 L89.8 qt · 85.0 L+167% 7840 (A)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Ford 7840 (A) sources

Source
  • Source: Traktorenlexikon, “Ford 7840”

Hürlimann H-468 "Prestige" sources

Source
  • Source: Traktorenlexikon, “Hürlimann H 468 Prestige”