Ford 7600 (A) or Lamborghini 874-90 Turbo DT?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 7600 (A) and Lamborghini 874-90 Turbo DT, with the call on each
Question7600 (A)874-90 Turbo DTCall
Which puts more power through the PTO shaft?60.8 kW (81.5 hp)Traktorenlexikon, “Ford 7600”60.6 kW (81.3 hp)Traktorenlexikon, “Lamborghini 874-90 Turbo DT”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 7600 (A) and the 874-90 Turbo DT.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 7600 (A) and the 874-90 Turbo DT.
Which pumps more oil for implements?36.4 L/min (9.6 gpm)Traktorenlexikon, “Ford 7600”39.5 L/min (10.4 gpm)Traktorenlexikon, “Lamborghini 874-90 Turbo DT”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?2,700 kg (5,952 lb)Traktorenlexikon, “Ford 7600”2,880 kg (6,349 lb)Traktorenlexikon, “Lamborghini 874-90 Turbo DT”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?2,771 kg (6,109 lb)Traktorenlexikon, “Ford 7600”3,000 kg (6,614 lb)Traktorenlexikon, “Lamborghini 874-90 Turbo DT”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 7600 (A) and the 874-90 Turbo DT.
Which has the wider choice of gears?8 to 16Traktorenlexikon, “Ford 7600”20 to 24Traktorenlexikon, “Lamborghini 874-90 Turbo DT”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 7600 (A) and the 874-90 Turbo DT.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Ford 7600”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini 874-90 Turbo DT”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Ford 7600”540/1000 rpmTraktorenlexikon, “Lamborghini 874-90 Turbo DT”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Ford 7600”independentTraktorenlexikon, “Lamborghini 874-90 Turbo DT”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Ford 7600”Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini 874-90 Turbo DT”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1975–19811986–1990Ahead (a fact, not an advantage)The Lamborghini 874-90 Turbo DT is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Lamborghini 874-90 Turbo DT is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources