9 material differences · fewer than 12
Tractor oneFord 7600 (A)1975–1981No measured PTO figureTractor twoFord 7700 (A)1976–1981No measured PTO figure
Which should you choose?
Read our verdict on the 7600 (A) and the 7700 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 7600 (A) | 7700 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 90.8 hp | 90.8 hp | — |
| Engine declared | Ford 256 DF | Ford 256 DF or 268 DF | differs |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal operated dry Borg & Beck single disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.6 gpm · 36.4 L/min | 10.8 gpm · 41.0 L/min | +13% 7700 (A) |
| Three-point lift, at the coupling points declared | 5,952 lb · 2,700 kg | 5,886 lb · 2,670 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,109 lb · 2,771 kg | 8,305 lb · 3,767 kg | +36% 7700 (A) |
| Wheelbase declared | 87.5 in · 2,223 mm | 101.6 in · 2,581 mm | +16% 7700 (A) |
| Length declared | 145.2 in · 3,689 mm | 160.2 in · 4,069 mm | +10% 7700 (A) |
| Width declared | 80.7–101.7 in · 2,051–2,584 mm | 64.0–82.4 in · 1,626–2,094 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 21.7 in · 551 mm | +38% 7700 (A) |
| Turning radius, braked declared | 10.6 ft · 3.23 m | 12.8 ft · 3.90 m | +21% 7700 (A) |
| Fuel tank declared | 79.8 qt · 75.5 L | 188.1 qt · 178.0 L | +136% 7700 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 7600 (A) sources
- Source: Traktorenlexikon, “Ford 7600”
- Source: Traktorenlexikon, “Ford 6600”
Ford 7700 (A) sources
- Source: Traktorenlexikon, “Ford 7700”
- Source: Traktorenlexikon, “Ford 6700”