Ford 6710 vs International Harvester 884
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 6710 and the 884 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 6710 | 884 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80.9 hp | 78.9 hp | — |
| Engine declared | — | INTERNATIONAL-HARVESTER DT-268 | — |
| Displacement declared | — | 4.40 L | — |
| Maximum torque declared | 220 lb·ft · 298 N·m | 201 lb·ft · 272 N·m | +10% 6710 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 6710 |
| Clutch declared | Pedal-operated dry Borg & Beck single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 18.2 gpm · 68.9 L/min | 11.8 gpm · 44.6 L/min | +54% 6710 |
| Pressure declared | — | 2,698 psi · 186 bar | — |
| Three-point lift at ends declared | 9,381 lb · 4,255 kg | 5,238 lb · 2,376 kg | +79% 6710 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,975 lb · 3,164 kg | 5,787 lb · 2,625 kg | +21% 6710 |
| Wheelbase declared | 101.6 in · 2,580 mm | 88.8 in · 2,255 mm | +14% 6710 |
| Length declared | 152.5 in · 3,874 mm | 146.5 in · 3,720 mm | — |
| Width declared | 76.9 in · 1,953 mm | 78.7 in · 1,998 mm | — |
| Height declared | 114.6 in · 2,911 mm | 101.1 in · 2,568 mm | +13% 6710 |
| Ground clearance declared | 20.5 in · 520 mm | 12.2 in · 310 mm | +68% 6710 |
| Turning radius, braked declared | — | 11.6 ft · 3.55 m | — |
| Fuel tank declared | 188.1 qt · 178.0 L | 81.4 qt · 77.0 L | +131% 6710 |
Ford 6710 sources
Source
- Source: Traktorenlexikon, “Ford 6710”
International Harvester 884 sources
Source
- Source: Traktorenlexikon, “IHC 884”