11 material differences · fewer than 12
Tractor oneFord 67001976–1981No measured PTO figureTractor twoSAME Saturno 80 (DT)1972–1980No measured PTO figure
Which should you choose?
Read our verdict on the 6700 and the Saturno 80 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 6700 | Saturno 80 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.9 hp | 75.9 hp | — |
| Engine declared | Ford 256 DF or 268 DF | SAME DA 039-1054 L or 1054 P | differs |
| Displacement declared | — | 4.15 L | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal-operated, dry BORG & BECK single-plate clutch | Pedal-operated dry two-stage SAME double clutch | differs |
| Hydraulics & hitch | |||
| Three-point lift, at the coupling points declared | 4,277 lb · 1,940 kg | 4,806 lb · 2,180 kg | +12% Saturno 80 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,025 lb · 3,640 kg | 6,085 lb · 2,760 kg | +32% 6700 |
| Wheelbase declared | 101.6 in · 2,581 mm | 92.5 in · 2,350 mm | +10% 6700 |
| Length declared | 151.8 in · 3,856 mm | 143.7 in · 3,650 mm | +6% 6700 |
| Width declared | 76.9–101.7 in · 1,953–2,584 mm | 76.0–95.7 in · 1,930–2,430 mm | differs |
| Ground clearance declared | 20.0 in · 508 mm | 19.7 in · 500 mm | — |
| Turning radius, braked declared | 12.3 ft · 3.73 m | 11.5 ft · 3.50 m | +7% 6700 |
| Fuel tank declared | 112.0 qt · 106.0 L | 84.5 qt · 80.0 L | +33% 6700 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 6700 sources
- Source: Traktorenlexikon, “Ford 6700”
SAME Saturno 80 (DT) sources
- Source: Traktorenlexikon, “SAME Saturno 80 Synchro”