6 material differences · fewer than 12
Tractor oneFord 6610 (A)1981–1989No measured PTO figureTractor twoJohn Deere 2140 (A)1979–1986No measured PTO figure
Which should you choose?
Read our verdict on the 6610 (A) and the 2140 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 6610 (A) | 2140 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80.9 hp | 81.0 hp | — |
| Maximum torque declared | 210 lb·ft · 285 N·m | 199 lb·ft · 270 N·m | +6% 6610 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | — | 12.4 gpm · 47.0 L/min | — |
| Pressure declared | — | 2,466 psi · 170 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,011 lb · 3,180 kg | 6,724 lb · 3,050 kg | — |
| Maximum permissible mass declared | — | 11,905 lb · 5,400 kg | — |
| Wheelbase declared | 87.5 in · 2,223 mm | 89.8 in · 2,280 mm | — |
| Length declared | 146.5 in · 3,720 mm | 147.0 in · 3,735 mm | — |
| Width declared | 76.4–96.5 in · 1,940–2,450 mm | 80.9 in · 2,055 mm | differs |
| Ground clearance declared | 18.5 in · 470 mm | 25.8 in · 656 mm | +40% 2140 (A) |
| Turning radius, braked declared | 10.9 ft · 3.33 m | — | — |
| Fuel tank declared | 84.0–112.0 qt · 79.5–106.0 L | 107.8 qt · 102.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 6610 (A) sources
- Source: Traktorenlexikon, “Ford 6610”
John Deere 2140 (A) sources
- Source: Traktorenlexikon, “John Deere 2140”