9 material differences · fewer than 12
Tractor oneFord 6600 (A)1975–1981No measured PTO figureTractor twoRenault 80-14 TX1984–1987No measured PTO figure
Which should you choose?
Read our verdict on the 6600 (A) and the 80-14 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 6600 (A) | 80-14 TX | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 77.0 hp | 77.0 hp | — |
| Engine declared | Ford 256 DF | MWM D 226-4 | differs |
| Displacement declared | — | 4.15 L | — |
| Maximum torque declared | — | 190 lb·ft · 258 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 80-14 TX |
| Clutch declared | — | Dry LuK double clutch, pedal-operated driving clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.2 gpm · 35.0 L/min | 10.9 gpm · 41.4 L/min | +18% 80-14 TX |
| Pressure declared | — | 1,595 psi · 110 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,165 lb · 3,250 kg | 8,378 lb · 3,800 kg | +17% 80-14 TX |
| Wheelbase declared | 99.4 in · 2,524 mm | 94.3 in · 2,394 mm | +5% 6600 (A) |
| Length declared | 143.7 in · 3,651 mm | 159.8 in · 4,058 mm | +11% 80-14 TX |
| Width declared | 68.9–87.0 in · 1,750–2,210 mm | 78.0–87.8 in · 1,980–2,229 mm | differs |
| Ground clearance declared | 17.7 in · 450 mm | 14.8 in · 377 mm | +19% 6600 (A) |
| Turning radius, braked declared | 10.6 ft · 3.22 m | 16.4 ft · 5.01 m | +56% 80-14 TX |
| Fuel tank declared | 79.8 qt · 75.5 L | 77.1 qt · 73.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 6600 (A) sources
- Source: Traktorenlexikon, “Ford 6600”
Renault 80-14 TX sources
- Source: Traktorenlexikon, “Renault 80-14 TX R7762”
- Source: Traktorenlexikon, “Fendt Farmer 108 S/SA”