Ford 640 or Ford 740?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 640 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 740 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 640 and Ford 740, with the call on each
Question640740Call
Which puts more power through the PTO shaft?23.8 kW (31.9 hp)Traktorenlexikon, “Ford 600”23.8 kW (31.9 hp)Traktorenlexikon, “Ford 700”Not comparableNot comparable on power at the PTO shaft: the 640 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 740 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 640 and the 740.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 640 and the 740.
Which pumps more oil for implements?10.2 L/min (2.7 gpm) to 22.7 L/min (6.0 gpm)Traktorenlexikon, “Ford 600”10.2 L/min (2.7 gpm) to 22.7 L/min (6.0 gpm)Traktorenlexikon, “Ford 700”EvenEven on hydraulic flow (both pump flow, as stated by the source): the figures vary by configuration and the ranges overlap.
Which lifts more on the three-point hitch?567 kg (1,250 lb)Traktorenlexikon, “Ford 600”567 kg (1,250 lb)Traktorenlexikon, “Ford 700”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?1,369 kg (3,018 lb)Traktorenlexikon, “Ford 600”1,538 kg (3,391 lb)Traktorenlexikon, “Ford 700”Ahead (a fact, not an advantage)The Ford 740 (also listed as 700) is 12% heavier (169 kg / 373 lb) than the Ford 640 (also listed as 600) (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 640 and the 740.
Which has the wider choice of gears?4 to 5Traktorenlexikon, “Ford 600”4Traktorenlexikon, “Ford 700”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 640 and the 740.
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “Ford 600”21 km/h (13.0 mph)Traktorenlexikon, “Ford 700”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Ford 600”540 rpmTraktorenlexikon, “Ford 700”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the 640 and the 740.
Which drives on both axles?2WDTraktorenlexikon, “Ford 600”2WDTraktorenlexikon, “Ford 700”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1954–19571954–1957EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Ford 740 (also listed as 700) is 12% heavier (169 kg / 373 lb) than the Ford 640 (also listed as 600) (both unladen weight, as stated by the source).
  • Even on hydraulic flow (both pump flow, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 640 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 740 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources