11 material differences · fewer than 12
Tractor oneFord 56101981–1991No measured PTO figureTractor twoInternational Harvester Hydro 861976–1980No measured PTO figure
Which should you choose?
Read our verdict on the 5610 and the Hydro 86 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 5610 | Hydro 86 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 71 hp | 71 hp | — |
| Engine declared | — | INTERNATIONAL HARVESTER C-291 | — |
| Maximum torque declared | 181 lb·ft · 245 N·m | 220 lb·ft · 298 N·m | +22% Hydro 86 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-actuated, dry Borg & Beck single-disc clutch | Pedal operated ceramic clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.6 gpm · 36.4 L/min | 12.0 gpm · 45.5 L/min | +25% Hydro 86 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,047 lb · 2,743 kg | 8,166 lb · 3,704 kg | +35% Hydro 86 |
| Wheelbase declared | 87.5 in · 2,223 mm | 103.0 in · 2,616 mm | +18% Hydro 86 |
| Length declared | 107.1 in · 2,720 mm | 162.0 in · 4,115 mm | +51% Hydro 86 |
| Width declared | 76.4–96.5 in · 1,940–2,450 mm | 89.4 in · 2,271 mm | differs |
| Ground clearance declared | 18.5 in · 470 mm | 21.0 in · 533 mm | +13% Hydro 86 |
| Turning radius, braked declared | 10.9 ft · 3.32 m | 12.0 ft · 3.66 m | +10% Hydro 86 |
| Fuel tank declared | 84.0–112.0 qt · 79.5–106.0 L | 123.9 qt · 117.3 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 5610 sources
- Source: Traktorenlexikon, “Ford 5610”
International Harvester Hydro 86 sources
- Source: Traktorenlexikon, “IHC Hydro 86”
- Source: Traktorenlexikon, “Farmall Farmall 756”