Ford 5030 (A) vs New Holland 4835 (A)

13 material differences

Tractor one

1992–1996

No measured PTO figure

Tractor two

1996–1998

No measured PTO figure

Which should you choose?

Read our verdict on the 5030 (A) and the 4835 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 5030 (A) and New Holland 4835 (A), field by field
Field	5030 (A)	4835 (A)	Gap
Engine
Engine power, claimed claimed	69.1 hp	64.1 hp	+8% 5030 (A)
Engine declared	Ford C 256 CID-NA	Iveco 8045.06	differs
Displacement declared	4.19 L	3.61 L	+16% 5030 (A)
Maximum torque declared	176 lb·ft · 239 N·m	146 lb·ft · 198 N·m	+21% 5030 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated dry AP single plate clutch	dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.2 gpm · 34.8 L/min	11.8 gpm · 44.5 L/min	+28% 4835 (A)
Pressure declared	1,508 psi · 104 bar	2,103 psi · 145 bar	+39% 4835 (A)
Three-point lift at ends declared	4,381 lb · 1,987 kg	6,393 lb · 2,900 kg	+46% 4835 (A)
Rear PTO speeds declared	540 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,217 lb · 2,820 kg	8,620 lb · 3,910 kg	+39% 4835 (A)
Maximum permissible mass declared	—	11,464 lb · 5,200 kg	—
Wheelbase declared	89.6 in · 2,276 mm	92.2 in · 2,342 mm	—
Length declared	143.7 in · 3,650 mm	153.9 in · 3,910 mm	+7% 4835 (A)
Width declared	72.2 in · 1,835 mm	83.5 in · 2,120 mm	+16% 4835 (A)
Height declared	100.3 in · 2,548 mm	98.4 in · 2,500 mm	—
Ground clearance declared	13.9 in · 353 mm	18.9 in · 480 mm	+36% 4835 (A)
Turning radius, braked declared	—	12.4 ft · 3.79 m	—
Fuel tank declared	69.4 qt · 65.7 L	121.5 qt · 115.0 L	+75% 4835 (A)

Source

Source