Ford 5030 (A) vs Massey Ferguson MF 4325 (A)

11 material differences · fewer than 12

Tractor one

1992–1996

No measured PTO figure

Tractor two

2001–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 5030 (A) and the MF 4325 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Ford 5030 (A) and Massey Ferguson MF 4325 (A), field by field
Field	5030 (A)	MF 4325 (A)	Gap
Engine
Engine power, claimed claimed	69.1 hp	66.1 hp	—
Engine declared	Ford C 256 CID-NA	Perkins 1004.40	differs
Displacement declared	4.19 L	3.99 L	—
Maximum torque declared	176 lb·ft · 239 N·m	193 lb·ft · 261 N·m	+9% MF 4325 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal operated dry AP single plate clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	9.2 gpm · 34.8 L/min	—	—
Pressure declared	1,508 psi · 104 bar	2,031 psi · 140 bar	+35% MF 4325 (A)
Three-point lift at ends declared	4,381 lb · 1,987 kg	6,744 lb · 3,059 kg	+54% MF 4325 (A)
Rear PTO speeds declared	540 rpm	540/1000/540E rpm	differs
Weight & dimensions
Unladen weight declared	6,217 lb · 2,820 kg	6,936 lb · 3,146 kg	+12% MF 4325 (A)
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	89.6 in · 2,276 mm	92.5 in · 2,350 mm	—
Length declared	143.7 in · 3,650 mm	151.6 in · 3,850 mm	+5% MF 4325 (A)
Width declared	72.2 in · 1,835 mm	76.8 in · 1,950 mm	+6% MF 4325 (A)
Height declared	100.3 in · 2,548 mm	96.5 in · 2,450 mm	—
Ground clearance declared	13.9 in · 353 mm	19.3 in · 490 mm	+39% MF 4325 (A)
Fuel tank declared	69.4 qt · 65.7 L	88.8 qt · 84.0 L	+28% MF 4325 (A)

Source

Source