9 material differences · fewer than 12

Tractor oneFord 48351996–1998No measured PTO figureTractor twoRenault Ceres 75 (A)1993–1995No measured PTO figure

Which should you choose?

Read our verdict on the 4835 and the Ceres 75 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

Ford 4835 and Renault Ceres 75 (A), field by field
Field	4835	Ceres 75 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Iveco 8045.06	Perkins LD 80442	differs
Displacement declared	3.61 L	3.86 L	+7% Ceres 75 (A)
Maximum torque declared	146 lb·ft · 198 N·m	176 lb·ft · 239 N·m	+21% Ceres 75 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	11.8 gpm · 44.5 L/min	9.0 gpm · 34.1 L/min	+30% 4835
Pressure declared	2,103 psi · 145 bar	—	—
Three-point lift, at the coupling points declared	6,393 lb · 2,900 kg	6,327 lb · 2,870 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,620 lb · 3,910 kg	6,548 lb · 2,970 kg	+32% 4835
Maximum permissible mass declared	11,464 lb · 5,200 kg	12,125 lb · 5,500 kg	+6% Ceres 75 (A)
Wheelbase declared	92.2 in · 2,342 mm	93.3 in · 2,369 mm	—
Length declared	153.9 in · 3,910 mm	155.2 in · 3,941 mm	—
Width declared	83.5–99.2 in · 2,120–2,520 mm	73.2–92.3 in · 1,860–2,345 mm	differs
Height, over the cab declared	98.4 in · 2,500 mm	99.2 in · 2,520 mm	—
Ground clearance declared	18.9 in · 480 mm	17.7 in · 450 mm	+7% 4835
Turning radius, braked declared	12.4 ft · 3.79 m	12.5 ft · 3.80 m	—
Fuel tank declared	121.5 qt · 115.0 L	121.5 qt · 115.0 L	—

Source

Source