Ford 4835 vs Ford 5030 (A)

13 material differences

Tractor one

1996–1998

No measured PTO figure

Tractor two

1992–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 4835 and the 5030 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 4835 and Ford 5030 (A), field by field
Field	4835	5030 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	69.1 hp	+8% 5030 (A)
Engine declared	Iveco 8045.06	Ford C 256 CID-NA	differs
Displacement declared	3.61 L	4.19 L	+16% 5030 (A)
Maximum torque declared	146 lb·ft · 198 N·m	176 lb·ft · 239 N·m	+21% 5030 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	Pedal operated dry AP single plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	11.8 gpm · 44.5 L/min	9.2 gpm · 34.8 L/min	+28% 4835
Pressure declared	2,103 psi · 145 bar	1,508 psi · 104 bar	+39% 4835
Three-point lift at ends declared	6,393 lb · 2,900 kg	4,381 lb · 1,987 kg	+46% 4835
Rear PTO speeds declared	540/540E/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	8,620 lb · 3,910 kg	6,217 lb · 2,820 kg	+39% 4835
Maximum permissible mass declared	11,464 lb · 5,200 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	89.6 in · 2,276 mm	—
Length declared	153.9 in · 3,910 mm	143.7 in · 3,650 mm	+7% 4835
Width declared	83.5 in · 2,120 mm	72.2 in · 1,835 mm	+16% 4835
Height declared	98.4 in · 2,500 mm	100.3 in · 2,548 mm	—
Ground clearance declared	18.9 in · 480 mm	13.9 in · 353 mm	+36% 4835
Turning radius, braked declared	12.4 ft · 3.79 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	69.4 qt · 65.7 L	+75% 4835

Source

Source