Ford 4830 (A) vs SAME Explorer 65 (DT)

11 material differences · fewer than 12

Tractor one

1990–1992

No measured PTO figure

Tractor two

1983–1986

No measured PTO figure

Which should you choose?

Read our verdict on the 4830 (A) and the Explorer 65 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Ford 4830 (A) and SAME Explorer 65 (DT), field by field
Field	4830 (A)	Explorer 65 (DT)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Ford L 256 CID-NA	SAME 916.4 A	differs
Displacement declared	4.19 L	3.67 L	+14% 4830 (A)
Maximum torque declared	184 lb·ft · 250 N·m	153 lb·ft · 208 N·m	+20% 4830 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry AP single-disc clutch	pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	9.3 gpm · 35.3 L/min	9.6 gpm · 36.5 L/min	—
Pressure declared	1,378–1,450 psi · 95–100 bar	2,611 psi · 180 bar	differs
Three-point lift at ends declared	4,381 lb · 1,987 kg	7,562 lb · 3,430 kg	+73% Explorer 65 (DT)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	6,526 lb · 2,960 kg	5,379 lb · 2,440 kg	+21% 4830 (A)
Wheelbase declared	89.6 in · 2,276 mm	91.5 in · 2,325 mm	—
Length declared	143.7 in · 3,650 mm	151.6 in · 3,850 mm	+5% Explorer 65 (DT)
Width declared	69.7 in · 1,771 mm	76.8 in · 1,950 mm	+10% Explorer 65 (DT)
Height declared	100.3 in · 2,548 mm	96.5 in · 2,450 mm	—
Ground clearance declared	12.0 in · 305 mm	17.9 in · 455 mm	+49% Explorer 65 (DT)
Turning radius, braked declared	—	11.0 ft · 3.35 m	—
Fuel tank declared	69.4 qt · 65.7 L	70.8 qt · 67.0 L	—

Source

Source