7 material differences · fewer than 12

Tractor oneFord 4830 (A)1990–1992No measured PTO figureTractor twoRenault Ceres 75 (A)1993–1995No measured PTO figure

Which should you choose?

Read our verdict on the 4830 (A) and the Ceres 75 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

Ford 4830 (A) and Renault Ceres 75 (A), field by field
Field	4830 (A)	Ceres 75 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Ford L 256 CID-NA	Perkins LD 80442	differs
Displacement declared	4.19 L	3.86 L	+8% 4830 (A)
Maximum torque declared	184 lb·ft · 250 N·m	176 lb·ft · 239 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry AP single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Constant flow	—
Pump flow declared	9.3 gpm · 35.3 L/min	9.0 gpm · 34.1 L/min	—
Pressure declared	1,378–1,450 psi · 95–100 bar	—	—
Three-point lift, at the coupling points declared	4,381 lb · 1,987 kg	6,327 lb · 2,870 kg	+44% Ceres 75 (A)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,526 lb · 2,960 kg	6,548 lb · 2,970 kg	—
Maximum permissible mass declared	—	12,125 lb · 5,500 kg	—
Wheelbase declared	89.6 in · 2,276 mm	93.3 in · 2,369 mm	—
Length declared	143.7 in · 3,650 mm	155.2 in · 3,941 mm	+8% Ceres 75 (A)
Width declared	69.7–96.7 in · 1,771–2,457 mm	73.2–92.3 in · 1,860–2,345 mm	—
Height, over the cab declared	100.3 in · 2,548 mm	99.2 in · 2,520 mm	—
Ground clearance declared	12.0 in · 305 mm	17.7 in · 450 mm	+48% Ceres 75 (A)
Turning radius, braked declared	—	12.5 ft · 3.80 m	—
Fuel tank declared	69.4 qt · 65.7 L	121.5 qt · 115.0 L	+75% Ceres 75 (A)

Source

Source