Ford 4635 (A) or Massey Ferguson MF 363 (A)?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 4635 (A) and Massey Ferguson MF 363 (A), with the call on each
Question4635 (A)MF 363 (A)Call
Which puts more power through the PTO shaft?37.5 kW (50.3 hp)Traktorenlexikon, “Ford 4635”37.5 kW (50.3 hp)Traktorenlexikon, “Massey Ferguson MF 363”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 4635 (A) and the MF 363 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 4635 (A) and the MF 363 (A).
Which pumps more oil for implements?44.5 L/min (11.8 gpm)Traktorenlexikon, “Ford 4635”No figureNo call on hydraulic flow: no figure on record for the MF 363 (A).
Which lifts more on the three-point hitch?2,200 kg (4,850 lb)Traktorenlexikon, “Ford 4635”2,400 kg (5,291 lb)Traktorenlexikon, “Massey Ferguson MF 363”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,940 kg (8,686 lb)Traktorenlexikon, “Ford 4635”2,400 kg (5,291 lb)Traktorenlexikon, “Massey Ferguson MF 363”Ahead (a fact, not an advantage)The Ford 4635 (A) is 64% heavier (1,540 kg / 3,395 lb) than the Massey Ferguson MF 363 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,200 kg (11,464 lb)Traktorenlexikon, “Ford 4635”No figureNo call on maximum permissible mass: no figure on record for the MF 363 (A).
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Ford 4635”12Traktorenlexikon, “Massey Ferguson MF 363”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?YesTraktorenlexikon, “Ford 4635”YesTraktorenlexikon, “Massey Ferguson MF 363”EvenEven on a creeper range: every machine offers one.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Ford 4635”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 363”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E/1000 rpmTraktorenlexikon, “Ford 4635”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 363”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Ford 4635”No figureNo call on PTO independence: not stated for the MF 363 (A).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Ford 4635”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 363”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1996–19981987–1994Ahead (a fact, not an advantage)The Ford 4635 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Ford 4635 (A) is 64% heavier (1,540 kg / 3,395 lb) than the Massey Ferguson MF 363 (A) (both unladen weight, as stated by the source).
  • The Ford 4635 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on a creeper range: every machine offers one.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and PTO independence.

← Every figure for both machines, side by side, with sources