Ford 4610 (A) vs International Harvester 574
9 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because the drive differs (2WD / 4WD; 2WD); they were not built in overlapping years (1981–1991; 1970–1975). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 4610 (A) | 574 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 60.2 hp | 65.0 hp | +8% 574 |
| Engine declared | — | INTERNATIONAL-HARVESTER D-239 | — |
| Displacement declared | — | 3.91 L | — |
| Maximum torque declared | 154 lb·ft · 209 N·m | 153 lb·ft · 207 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | — | pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.4 gpm · 31.7 L/min | 11.4–12.6 gpm · 43.1–47.7 L/min | differs |
| Three-point lift at ends declared | 4,251 lb · 1,928 kg | 3,968 lb · 1,800 kg | +7% 4610 (A) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,151 lb · 2,790 kg | 5,163 lb · 2,342 kg | +19% 4610 (A) |
| Wheelbase declared | 84.5 in · 2,146 mm | 85.0 in · 2,160 mm | — |
| Length declared | 138.6 in · 3,521 mm | 139.0 in · 3,531 mm | — |
| Width declared | 69.7 in · 1,770 mm | 69.0 in · 1,753 mm | — |
| Height declared | 106.7 in · 2,710 mm | 86.5 in · 2,197 mm | +23% 4610 (A) |
| Ground clearance declared | 19.5 in · 495 mm | 16.0 in · 406 mm | +22% 4610 (A) |
| Turning radius, braked declared | 11.5 ft · 3.49 m | 9.0 ft · 2.74 m | +27% 4610 (A) |
| Fuel tank declared | 63.9 qt · 60.5 L | 81.7 qt · 77.3 L | +28% 574 |
Ford 4610 (A) sources
Source
- Source: Traktorenlexikon, “Ford 4610”
International Harvester 574 sources
Source
- Source: Traktorenlexikon, “IHC 574”
- Source: Traktorenlexikon, “IHC 574 (USA)”