8 material differences · fewer than 12
Tractor oneFord 4600 (A)1975–1981No measured PTO figureTractor twoHürlimann H-361 (A)1986–1997No measured PTO figure
Which should you choose?
Read our verdict on the 4600 (A) and the H-361 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 4600 (A) | H-361 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.1 hp | 59.1 hp | — |
| Engine declared | Ford 201 DF | Hürlimann 1.053 P | differs |
| Displacement declared | 3.29 L | 3.12 L | +6% 4600 (A) |
| Maximum torque declared | — | 144 lb·ft · 195 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry BORG & BECK single-disc clutch | pedal operated dry SLH single disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.6 gpm · 32.7 L/min | — | — |
| Pressure declared | — | 1,740 psi · 120 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,952 lb · 2,700 kg | 5,346 lb · 2,425 kg | +11% 4600 (A) |
| Wheelbase declared | 84.5 in · 2,146 mm | 82.1 in · 2,085 mm | — |
| Length declared | 135.7 in · 3,448 mm | 135.4 in · 3,440 mm | — |
| Width declared | 69.8–79.6 in · 1,772–2,022 mm | 69.3–89.0 in · 1,760–2,260 mm | differs |
| Ground clearance declared | 22.0 in · 560 mm | 13.2 in · 335 mm | +67% 4600 (A) |
| Turning radius, braked declared | 10.8 ft · 3.28 m | — | — |
| Fuel tank declared | 63.9 qt · 60.5 L | 58.1 qt · 55.0 L | +10% 4600 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 4600 (A) sources
- Source: Traktorenlexikon, “Ford 4600”
Hürlimann H-361 (A) sources
- Source: Traktorenlexikon, “Hürlimann H 361”