Ford 4130 (A) vs VALMET 504
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 4130 (A) and the 504 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 4130 (A) | 504 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 55.3 hp | 49.3 hp | +12% 4130 (A) |
| Engine declared | Ford K 201 CID-NA | VALMET D 27 B | differs |
| Displacement declared | 3.29 L | 2.69 L | +23% 4130 (A) |
| Maximum torque declared | 143 lb·ft · 194 N·m | 125 lb·ft · 170 N·m | +14% 4130 (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal operated dry AP single-disc clutch | dry Fichtel & Sachs dual clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.3 gpm · 35.3 L/min | 7.1 gpm · 27.0 L/min | +31% 4130 (A) |
| Pressure declared | 1,378–1,450 psi · 95–100 bar | — | — |
| Three-point lift at ends declared | 4,381 lb · 1,987 kg | 3,957 lb · 1,795 kg | +11% 4130 (A) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,155 lb · 2,792 kg | 5,930 lb · 2,690 kg | — |
| Wheelbase declared | 84.5 in · 2,146 mm | 83.1 in · 2,112 mm | — |
| Length declared | 138.6 in · 3,521 mm | 142.4 in · 3,617 mm | — |
| Width declared | 69.7 in · 1,771 mm | 74.4 in · 1,890 mm | +7% 504 |
| Height declared | 96.0 in · 2,438 mm | 98.4 in · 2,500 mm | — |
| Ground clearance declared | 13.9 in · 353 mm | 15.7 in · 400 mm | +13% 504 |
| Turning radius, braked declared | — | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 69.4 qt · 65.7 L | 68.7 qt · 65.0 L | — |
Ford 4130 (A) sources
Source
- Source: Traktorenlexikon, “Ford 4130”
VALMET 504 sources
Source
- Source: Traktorenlexikon, “Valmet 504”