11 material differences · fewer than 12

Tractor oneFord 4130 (A)1990–1996No measured PTO figureTractor twoSteyr 8065 (a)1986–1992No measured PTO figure

Which should you choose?

Read our verdict on the 4130 (A) and the 8065 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 4130 (A) and Steyr 8065 (a), field by field
Field	4130 (A)	8065 (a)	Gap
Engine
Engine power, claimed claimed	55.3 hp	55.3 hp	—
Engine declared	Ford K 201 CID-NA	Steyr WD-311.87 or WD-311.85	differs
Displacement declared	3.29 L	2.59 L	+27% 4130 (A)
Maximum torque declared	143 lb·ft · 194 N·m	147 lb·ft · 199 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–24.9 mph · 25–40 km/h	differs
Clutch declared	Pedal operated dry AP single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.3 gpm · 35.3 L/min	—	—
Pressure declared	1,378–1,450 psi · 95–100 bar	3,553 psi · 245 bar	differs
Rear PTO speeds declared	540 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,155 lb · 2,792 kg	5,368 lb · 2,435 kg	+15% 4130 (A)
Wheelbase declared	84.5 in · 2,146 mm	78.7 in · 1,998 mm	+7% 4130 (A)
Length declared	138.6 in · 3,521 mm	137.6 in · 3,495 mm	—
Width declared	69.7–96.7 in · 1,771–2,457 mm	67.8 in · 1,722 mm	differs
Height, over the cab declared	96.0 in · 2,438 mm	90.3 in · 2,293 mm	+6% 4130 (A)
Ground clearance declared	13.9 in · 353 mm	16.9 in · 430 mm	+22% 8065 (a)
Turning radius, braked declared	—	10.3 ft · 3.14 m	—
Fuel tank declared	69.4 qt · 65.7 L	63.4 qt · 60.0 L	+10% 4130 (A)

Source

Source