Ford 4130 (A) vs SOMECA 580 (TD)

12 material differences

Tractor one

1990–1996

No measured PTO figure

Tractor two

1978–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 4130 (A) and the 580 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 4130 (A) and SOMECA 580 (TD), field by field
Field	4130 (A)	580 (TD)	Gap
Engine
Engine power, claimed claimed	55.3 hp	57.3 hp	—
Engine declared	Ford K 201 CID-NA	FIAT-IVECO 8035.04.370 (377)	differs
Displacement declared	3.29 L	2.75 L	+20% 4130 (A)
Maximum torque declared	143 lb·ft · 194 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal operated dry AP single-disc clutch	Dry FERODO double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.3 gpm · 35.3 L/min	6.5 gpm · 24.6 L/min	+43% 4130 (A)
Pressure declared	1,378–1,450 psi · 95–100 bar	2,843 psi · 196 bar	differs
Three-point lift at ends declared	4,381 lb · 1,987 kg	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	6,155 lb · 2,792 kg	5,148 lb · 2,335 kg	+20% 4130 (A)
Wheelbase declared	84.5 in · 2,146 mm	84.6 in · 2,150 mm	—
Length declared	138.6 in · 3,521 mm	150.0 in · 3,810 mm	+8% 580 (TD)
Width declared	69.7 in · 1,771 mm	76.0 in · 1,930 mm	+9% 580 (TD)
Height declared	96.0 in · 2,438 mm	103.7 in · 2,635 mm	+8% 580 (TD)
Ground clearance declared	13.9 in · 353 mm	19.0 in · 483 mm	+37% 580 (TD)
Turning radius, braked declared	—	9.7 ft · 2.95 m	—
Fuel tank declared	69.4 qt · 65.7 L	84.5 qt · 80.0 L	+22% 580 (TD)

Source

Source