Ford 4130 (A) vs SAME Argon 50 (DT)

14 material differences

Tractor one

1990–1996

No measured PTO figure

Tractor two

1993–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 4130 (A) and the Argon 50 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

Ford 4130 (A) and SAME Argon 50 (DT), field by field
Field	4130 (A)	Argon 50 (DT)	Gap
Engine
Engine power, claimed claimed	55.3 hp	49.3 hp	+12% 4130 (A)
Engine declared	Ford K 201 CID-NA	SAME 1000.3 A-3	differs
Displacement declared	3.29 L	3.00 L	+10% 4130 (A)
Maximum torque declared	143 lb·ft · 194 N·m	127 lb·ft · 172 N·m	+13% 4130 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated dry AP single-disc clutch	Pedal operated dry single plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	9.3 gpm · 35.3 L/min	8.7 gpm · 33.0 L/min	+7% 4130 (A)
Pressure declared	1,378–1,450 psi · 95–100 bar	3,046 psi · 210 bar	differs
Three-point lift at ends declared	4,381 lb · 1,987 kg	6,393 lb · 2,900 kg	+46% Argon 50 (DT)
Rear PTO speeds declared	540 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	6,155 lb · 2,792 kg	4,608 lb · 2,090 kg	+34% 4130 (A)
Maximum permissible mass declared	—	8,598 lb · 3,900 kg	—
Wheelbase declared	84.5 in · 2,146 mm	77.8 in · 1,975 mm	+9% 4130 (A)
Length declared	138.6 in · 3,521 mm	133.1 in · 3,380 mm	—
Width declared	69.7 in · 1,771 mm	64.6 in · 1,640 mm	+8% 4130 (A)
Height declared	96.0 in · 2,438 mm	88.4 in · 2,245 mm	+9% 4130 (A)
Ground clearance declared	13.9 in · 353 mm	15.4 in · 390 mm	+10% Argon 50 (DT)
Fuel tank declared	69.4 qt · 65.7 L	61.3 qt · 58.0 L	+13% 4130 (A)

Source

Source