Ford 4130 (A) vs New Holland TD 60 D (A)

9 material differences · fewer than 12

Tractor one

1990–1996

No measured PTO figure

Tractor two

2002–2008

No measured PTO figure

Which should you choose?

Read our verdict on the 4130 (A) and the TD 60 D (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Ford 4130 (A) and New Holland TD 60 D (A), field by field
Field	4130 (A)	TD 60 D (A)	Gap
Engine
Engine power, claimed claimed	55.3 hp	58.2 hp	+5% TD 60 D (A)
Engine declared	Ford K 201 CID-NA	IVECO 8035.050	differs
Displacement declared	3.29 L	2.93 L	+12% 4130 (A)
Maximum torque declared	143 lb·ft · 194 N·m	133 lb·ft · 181 N·m	+7% 4130 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated dry AP single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.3 gpm · 35.3 L/min	11.4 gpm · 43.0 L/min	+22% TD 60 D (A)
Pressure declared	1,378–1,450 psi · 95–100 bar	3,553 psi · 245 bar	differs
Three-point lift at ends declared	4,381 lb · 1,987 kg	6,477 lb · 2,938 kg	+48% TD 60 D (A)
Rear PTO speeds declared	540 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,155 lb · 2,792 kg	5,657 lb · 2,566 kg	+9% 4130 (A)
Wheelbase declared	84.5 in · 2,146 mm	85.6 in · 2,175 mm	—
Length declared	138.6 in · 3,521 mm	142.9 in · 3,630 mm	—
Width declared	69.7 in · 1,771 mm	70.8 in · 1,799 mm	—
Height declared	96.0 in · 2,438 mm	100.6 in · 2,555 mm	—
Ground clearance declared	13.9 in · 353 mm	14.6 in · 371 mm	—
Fuel tank declared	69.4 qt · 65.7 L	95.1 qt · 90.0 L	+37% TD 60 D (A)

Source

Source