11 material differences · fewer than 12
Tractor oneFord 4130 (A)1990–1996No measured PTO figureTractor twoLandini 6030 (DT) TL-39 N/B (TL-39 DT/B)1983–1987No measured PTO figure
Which should you choose?
Read our verdict on the 4130 (A) and the 6030 (DT) TL-39 N/B (TL-39 DT/B) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 4130 (A) | 6030 (DT) TL-39 N/B (TL-39 DT/B) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 55.3 hp | 55.3 hp | — |
| Engine declared | Ford K 201 CID-NA | Perkins AT 3.152-4 | differs |
| Displacement declared | 3.29 L | 2.50 L | +32% 4130 (A) |
| Maximum torque declared | 143 lb·ft · 194 N·m | 131 lb·ft · 178 N·m | +9% 4130 (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal operated dry AP single-disc clutch | Dry and air-cooled OMG or LuK double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.3 gpm · 35.3 L/min | 9.6 gpm · 36.5 L/min | — |
| Pressure declared | 1,378–1,450 psi · 95–100 bar | 2,901 psi · 200 bar | differs |
| Three-point lift, at the coupling points declared | 4,381 lb · 1,987 kg | 4,429 lb · 2,009 kg | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,155 lb · 2,792 kg | 4,971 lb · 2,255 kg | +24% 4130 (A) |
| Wheelbase declared | 84.5 in · 2,146 mm | 81.9 in · 2,080 mm | — |
| Length declared | 138.6 in · 3,521 mm | 138.2 in · 3,510 mm | — |
| Width declared | 69.7–96.7 in · 1,771–2,457 mm | 75.6 in · 1,920 mm | differs |
| Ground clearance declared | 13.9 in · 353 mm | 19.5 in · 495 mm | +40% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Turning radius, braked declared | — | 12.4 ft · 3.79 m | — |
| Fuel tank declared | 69.4 qt · 65.7 L | 63.9 qt · 60.5 L | +9% 4130 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 4130 (A) sources
- Source: Traktorenlexikon, “Ford 4130”
Landini 6030 (DT) TL-39 N/B (TL-39 DT/B) sources
- Source: Traktorenlexikon, “Landini 6030 (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”