10 material differences · fewer than 12
Tractor oneFord 4100 (A)1975–1981No measured PTO figureTractor twoUTB U-530 (DTC)1982–1985No measured PTO figure
Which should you choose?
Read our verdict on the 4100 (A) and the U-530 (DTC) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 4100 (A) | U-530 (DTC) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 53.2 hp | — |
| Engine declared | Ford 183 DF | UTB D-115.050 | differs |
| Displacement declared | 3.00 L | 2.70 L | +11% 4100 (A) |
| Maximum torque declared | — | 119 lb·ft · 162 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 14.9 mph · 24 km/h | +25% 4100 (A) |
| Clutch declared | Pedal operated dry BORG & BECK single disc clutch | Dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.5 gpm · 32.3 L/min | 5.8 gpm · 21.8 L/min | +48% 4100 (A) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,225 lb · 2,370 kg | 4,233 lb · 1,920 kg | +23% 4100 (A) |
| Wheelbase declared | 77.5 in · 1,969 mm | 77.2 in · 1,960 mm | — |
| Length declared | 135.0 in · 3,429 mm | 116.9 in · 2,970 mm | +15% 4100 (A) |
| Width declared | 68.5–94.0 in · 1,740–2,388 mm | 61.8–87.2 in · 1,570–2,215 mm | differs |
| Ground clearance declared | 22.0 in · 560 mm | 18.3 in · 465 mm | +20% 4100 (A) |
| Turning radius, braked declared | 9.6 ft · 2.93 m | 12.0 ft · 3.65 m | +25% U-530 (DTC) |
| Fuel tank declared | — | 57.1 qt · 54.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 4100 (A) sources
- Source: Traktorenlexikon, “Ford 4100”
UTB U-530 (DTC) sources
- Source: Traktorenlexikon, “UTB U 530”