Ford 4100 (A) vs Steyr 8060 (a)

9 material differences · fewer than 12

Tractor one

1975–1981

No measured PTO figure

Tractor two

1979–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 4100 (A) and the 8060 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Ford 4100 (A) and Steyr 8060 (a), field by field
Field	4100 (A)	8060 (a)	Gap
Engine
Engine power, claimed claimed	53.2 hp	47.3 hp	+12% 4100 (A)
Engine declared	Ford 183 DF	Steyr WD-311.41 or WD-311.87	differs
Displacement declared	3.00 L	2.59 L	+16% 4100 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated dry BORG & BECK single disc clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Pump flow declared	8.5 gpm · 32.3 L/min	6.4 gpm · 24.1 L/min	+34% 4100 (A)
Pressure declared	—	3,553 psi · 245 bar	—
Three-point lift at ends declared	4,387 lb · 1,990 kg	4,850 lb · 2,200 kg	+11% 8060 (a)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,225 lb · 2,370 kg	5,335 lb · 2,420 kg	—
Wheelbase declared	77.5 in · 1,969 mm	80.1 in · 2,035 mm	—
Length declared	135.0 in · 3,429 mm	137.6 in · 3,495 mm	—
Width declared	68.5 in · 1,740 mm	67.3 in · 1,710 mm	—
Height declared	89.8 in · 2,280 mm	92.9 in · 2,360 mm	—
Ground clearance declared	22.0 in · 560 mm	14.2 in · 360 mm	+56% 4100 (A)
Turning radius, braked declared	9.6 ft · 2.93 m	10.6 ft · 3.24 m	+11% 8060 (a)
Fuel tank declared	—	101.4 qt · 96.0 L	—

Source

Source