5 material differences · fewer than 12

Tractor oneFord 36101981–1983No measured PTO figureTractor twoSteyr 548 (a)1977–1981No measured PTO figure

Which should you choose?

Read our verdict on the 3610 and the 548 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

5 material differences · 4 fields identical or within 5%, which is not counted as material

Ford 3610 and Steyr 548 (a), field by field
Field3610548 (a)Gap
Engine
Engine power, claimed claimed46.4 hp46.4 hp—
Engine declared—Steyr WD-308.45—
Displacement declared—2.36 L—
Maximum torque declared132 lb·ft · 179.5 N·m116 lb·ft · 157 N·m+14% 3610
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Clutch declared—Dry Fichtel & Sachs single-disc clutch—
Hydraulics & hitch
Pump flow declared7.2 gpm · 27.4 L/min——
Rear PTO speeds declared540 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared5,335 lb · 2,420 kg4,321 lb · 1,960 kg+23% 3610
Wheelbase declared75.8 in · 1,925 mm76.8 in · 1,950 mm—
Length declared128.0 in · 3,250 mm129.9 in · 3,300 mm—
Width declared64.6–88.6 in · 1,640–2,250 mm63.5 in · 1,614 mmdiffers
Ground clearance declared12.4 in · 315 mm——
Turning radius, braked declared10.1 ft · 3.07 m——
Fuel tank declared52.0 qt · 49.2 L65.5 qt · 62.0 L+26% 548 (a)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Ford 3610 sources

Source
  • Source: Traktorenlexikon, “Ford 3610”

Steyr 548 (a) sources

Source
  • Source: Traktorenlexikon, “Steyr 548”
  • Source: Traktorenlexikon, “Steyr 545”