12 material differences

K)1988–2000No measured PTO figure

Which should you choose?

Read our verdict on the 3610 and the 5860 (DT) TL-22 N/K (TL-22 DT/K) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Ford 3610 and Landini 5860 (DT) TL-22 N/K (TL-22 DT/K), field by field
Field	3610	5860 (DT) TL-22 N/K (TL-22 DT/K)	Gap
Engine
Engine power, claimed claimed	46.4 hp	46.4 hp	—
Engine declared	—	Perkins AD 3.152 S	—
Displacement declared	—	2.50 L	—
Maximum torque declared	132 lb·ft · 179.5 N·m	124 lb·ft · 168 N·m	+7% 3610
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Dry and air-cooled LuK double clutch	—
Hydraulics & hitch
Pump flow declared	7.2 gpm · 27.4 L/min	10.0 gpm · 37.9 L/min	+38% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Pressure declared	—	2,756 psi · 190 bar	—
Three-point lift, at the coupling points declared	3,115 lb · 1,413 kg	4,497 lb · 2,040 kg	+44% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,335 lb · 2,420 kg	4,960 lb · 2,250 kg	+8% 3610
Wheelbase declared	75.8 in · 1,925 mm	83.7 in · 2,126 mm	+10% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Length declared	128.0 in · 3,250 mm	139.4 in · 3,540 mm	+9% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Width declared	64.6–88.6 in · 1,640–2,250 mm	71.5 in · 1,815 mm	differs
Height, over the safety frame declared	84.6 in · 2,150 mm	89.8 in · 2,280 mm	+6% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Ground clearance declared	12.4 in · 315 mm	17.1 in · 435 mm	+38% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Turning radius, braked declared	10.1 ft · 3.07 m	11.3 ft · 3.44 m	+12% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Fuel tank declared	52.0 qt · 49.2 L	90.9 qt · 86.0 L	+75% 5860 (DT) TL-22 N/K (TL-22 DT/K)

Source

Source