Ford 3600 (A) or Massey Ferguson MF 255?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 3600 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 255 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Ford 3600 (A) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 3600 (A) | MF 255 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 34.6 kW (46.4 hp)Traktorenlexikon, “Ford 3600” | 34.6 kW (46.4 hp)Traktorenlexikon, “Massey Ferguson MF 255” | Not comparableNot comparable on power at the PTO shaft: the 3600 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 255 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 3600 (A) and the MF 255. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 3600 (A) and the MF 255. |
| Which pumps more oil for implements? | 31.4 L/min (8.3 gpm)Traktorenlexikon, “Ford 3600” | 17.0 L/min (4.5 gpm)Traktorenlexikon, “Massey Ferguson MF 255” | AheadThe Ford 3600 (A) has 85% more hydraulic flow (14.4 L/min / 3.8 gpm) than the Massey Ferguson 255 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,270 kg (2,800 lb)Traktorenlexikon, “Ford 3600” | 1,800 kg (3,968 lb)Traktorenlexikon, “Massey Ferguson MF 255” | AheadThe Massey Ferguson 255 has 42% more lift (530 kg / 1,168 lb) than the Ford 3600 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 1,810 kg (3,990 lb)Traktorenlexikon, “Ford 3600” | 2,340 kg (5,159 lb)Traktorenlexikon, “Massey Ferguson MF 255” | Ahead (a fact, not an advantage)The Massey Ferguson 255 is 29% heavier (530 kg / 1,168 lb) than the Ford 3600 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 3600 (A) and the MF 255. |
| Which has the wider choice of gears? | 8Traktorenlexikon, “Ford 3600” | 8Traktorenlexikon, “Massey Ferguson MF 255” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 3600 (A) and the MF 255. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Ford 3600” | 25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 255” | AheadThe Ford 3600 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the Massey Ferguson 255 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Ford 3600” | 540 rpmTraktorenlexikon, “Massey Ferguson MF 255” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Ford 3600” | independentTraktorenlexikon, “Massey Ferguson MF 255” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Ford 3600” | 2WDTraktorenlexikon, “Massey Ferguson MF 255” | AheadThe Ford 3600 (A) is available with four-wheel drive; the Massey Ferguson 255 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1981–1993 | 1975–1981 | Ahead (a fact, not an advantage)The Ford 3600 (A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Ford 3600 (A) has 85% more hydraulic flow (14.4 L/min / 3.8 gpm) than the Massey Ferguson 255 (both pump flow, as stated by the source).
- The Massey Ferguson 255 has 42% more lift (530 kg / 1,168 lb) than the Ford 3600 (A) (both lift at the hitch ends, as stated by the source).
- The Massey Ferguson 255 is 29% heavier (530 kg / 1,168 lb) than the Ford 3600 (A) (both unladen weight, as stated by the source).
- The Ford 3600 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the Massey Ferguson 255 (both top speed forward, as stated by the source).
- The Ford 3600 (A) is available with four-wheel drive; the Massey Ferguson 255 is two-wheel drive (as stated by the sources).
- The Ford 3600 (A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on PTO independence: every PTO is independent.
- Not comparable on power at the PTO shaft: the 3600 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 255 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources