Ford 3600 (A) or J.I. Case 1190?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the J.I. Case 1190 is ahead on forward gears; the Ford 3600 (A) is ahead on drive.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 3600 (A) and J.I. Case 1190, with the call on each
Question3600 (A)1190Call
Which puts more power through the PTO shaft?29.0 kW (38.9 hp)Traktorenlexikon, “Ford 3600”28.8 kW (38.6 hp)Traktorenlexikon, “Case 1190”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 3600 (A) and the 1190.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 3600 (A) and the 1190.
Which pumps more oil for implements?31.4 L/min (8.3 gpm)Traktorenlexikon, “Ford 3600”29.4 L/min (7.8 gpm)Traktorenlexikon, “Case 1190”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?1,270 kg (2,800 lb)Traktorenlexikon, “Ford 3600”1,428 kg (3,148 lb)Traktorenlexikon, “Case 1190”Not comparableNot comparable on three-point lift: the 3600 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Ford 3600”); the 1190: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Case 1190”) — not the same quantity, basis and condition.
Which is heavier, for traction?1,810 kg (3,990 lb)Traktorenlexikon, “Ford 3600”2,096 kg (4,621 lb)Traktorenlexikon, “Case 1190”Ahead (a fact, not an advantage)The J.I. Case 1190 is 16% heavier (286 kg / 631 lb) than the Ford 3600 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 3600 (A) and the 1190.
Which has the wider choice of gears?8Traktorenlexikon, “Ford 3600”12Traktorenlexikon, “Case 1190”AheadThe J.I. Case 1190 has 50% more forward gears (4 gears) than the Ford 3600 (A) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 3600 (A) and the 1190.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Ford 3600”30 km/h (18.6 mph)Traktorenlexikon, “Case 1190”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Ford 3600”540 rpmTraktorenlexikon, “Case 1190”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Ford 3600”No figureNo call on PTO independence: not stated for the 1190.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Ford 3600”2WDTraktorenlexikon, “Case 1190”AheadThe Ford 3600 (A) is available with four-wheel drive; the J.I. Case 1190 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1981–19931980–1983EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 1190 is 16% heavier (286 kg / 631 lb) than the Ford 3600 (A) (both unladen weight, as stated by the source).
  • The J.I. Case 1190 has 50% more forward gears (4 gears) than the Ford 3600 (A) (both forward gears, as stated by the source).
  • The Ford 3600 (A) is available with four-wheel drive; the J.I. Case 1190 is two-wheel drive (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on three-point lift: the 3600 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Ford 3600”); the 1190: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Case 1190”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources