Ford 3000 "V" ( Dexta ) or Massey Ferguson MF 140?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 3000 "V" ( Dexta ) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 3000 "V" ( Dexta ) and Massey Ferguson MF 140, with the call on each
Question3000 "V" ( Dexta )MF 140Call
Which puts more power through the PTO shaft?32 kW (43 hp)Traktorenlexikon, “Ford 3000 V”31.6 kW (42.4 hp)Traktorenlexikon, “Massey Ferguson MF 140”Not comparableNot comparable on power at the PTO shaft: the 3000 "V" ( Dexta ) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 3000 "V" ( Dexta ) and the MF 140.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 3000 "V" ( Dexta ) and the MF 140.
Which pumps more oil for implements?—19.5 L/min (5.2 gpm)Traktorenlexikon, “Massey Ferguson MF 140”No figureNo call on hydraulic flow: no figure on record for the 3000 "V" ( Dexta ).
Which lifts more on the three-point hitch?1,270 kg (2,800 lb)Traktorenlexikon, “Ford 3000 V”1,236 kg (2,725 lb)Traktorenlexikon, “Massey Ferguson MF 140”Not comparableNot comparable on three-point lift: the 3000 "V" ( Dexta ): lift at an unstated point, as stated by the source (Traktorenlexikon, “Ford 3000 V”); the MF 140: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 140”) — not the same quantity, basis and condition.
Which is heavier, for traction?1,428 kg (3,148 lb) to 2,900 kg (6,393 lb)Traktorenlexikon, “Ford 3000 V”1,450 kg (3,197 lb)Traktorenlexikon, “Massey Ferguson MF 140”EvenEven on weight (both unladen weight, as stated by the source): the figures vary by configuration and the ranges overlap.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 3000 "V" ( Dexta ) and the MF 140.
Which has the wider choice of gears?7Traktorenlexikon, “Ford 3000 V”6 to 12Traktorenlexikon, “Massey Ferguson MF 140”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 3000 "V" ( Dexta ) and the MF 140.
Which is faster on the road?20 km/h (12.4 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Ford 3000 V”25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 140 S”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Ford 3000 V”540 rpmTraktorenlexikon, “Massey Ferguson MF 140”AheadThe Ford 3000 "V" ( Dexta ) offers 1000 rpm at the PTO, which the Massey Ferguson 140 does not (as stated by the sources).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the 3000 "V" ( Dexta ) and the MF 140.
Which drives on both axles?2WDTraktorenlexikon, “Ford 3000 V”2WDTraktorenlexikon, “Massey Ferguson MF 140”; Traktorenlexikon, “Massey Ferguson MF 140 S”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1964–19751966–1975EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Ford 3000 "V" ( Dexta ) offers 1000 rpm at the PTO, which the Massey Ferguson 140 does not (as stated by the sources).
  • Even on weight (both unladen weight, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 3000 "V" ( Dexta ) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 3000 "V" ( Dexta ): lift at an unstated point, as stated by the source (Traktorenlexikon, “Ford 3000 V”); the MF 140: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 140”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources