Ford 2110 (A) or UZINA TRACTORUL 420 (DT)?

Which should you choose?

On performance, every comparable figure that differs favours the Ford 2110 (A): hydraulic flow. It is also ahead on forward gears and top speed.

  • The Ford 2110 (A) suits loader and hydraulic implement work better on this data: 103% (16.5 L/min / 4.4 gpm) more hydraulic flow.
  • The Ford 2110 (A) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 2110 (A) and UZINA TRACTORUL 420 (DT), with the call on each
Question2110 (A)420 (DT)Call
Which puts more power through the PTO shaft?26.5 kW (35.5 hp)Traktorenlexikon, “Ford 2110”26.0 kW (34.9 hp)Traktorenlexikon, “UTB 420 (DT)”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 2110 (A) and the 420 (DT).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 2110 (A) and the 420 (DT).
Which pumps more oil for implements?32.5 L/min (8.6 gpm)Traktorenlexikon, “Ford 2110”16.0 L/min (4.2 gpm)Traktorenlexikon, “UTB 420 (DT)”AheadThe Ford 2110 (A) has 103% more hydraulic flow (16.5 L/min / 4.4 gpm) than the UZINA TRACTORUL 420 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?913 kg (2,013 lb)Traktorenlexikon, “Ford 2110”No figureNo call on three-point lift: no figure on record for the 420 (DT).
Which is heavier, for traction?1,660 kg (3,660 lb)Traktorenlexikon, “Ford 2110”1,640 kg (3,616 lb)Traktorenlexikon, “UTB 420 (DT)”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 2110 (A) and the 420 (DT).
Which has the wider choice of gears?12Traktorenlexikon, “Ford 2110”6 to 9Traktorenlexikon, “UTB 420 (DT)”AheadThe Ford 2110 (A) has 33% more forward gears (3 gears) than the UZINA TRACTORUL 420 (DT) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 2110 (A) and the 420 (DT).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Ford 2110”25 km/h (15.5 mph)Traktorenlexikon, “UTB 420 (DT)”AheadThe Ford 2110 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the UZINA TRACTORUL 420 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Ford 2110”540 rpmTraktorenlexikon, “UTB 420 (DT)”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “UTB 420 (DT)”No figureNo call on PTO independence: not stated for the 2110 (A).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Ford 2110”Two-wheel or four-wheel driveTraktorenlexikon, “UTB 420 (DT)”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1983–19871974–1981Ahead (a fact, not an advantage)The Ford 2110 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Ford 2110 (A) has 103% more hydraulic flow (16.5 L/min / 4.4 gpm) than the UZINA TRACTORUL 420 (DT) (both pump flow, as stated by the source).
  • The Ford 2110 (A) has 33% more forward gears (3 gears) than the UZINA TRACTORUL 420 (DT) (both forward gears, as stated by the source).
  • The Ford 2110 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the UZINA TRACTORUL 420 (DT) (both top speed forward, as stated by the source).
  • The Ford 2110 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources