Ford 2110 (A) vs Lamborghini 450 DT

12 material differences

Tractor one

1983–1987

No measured PTO figure

Tractor two

1992–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 2110 (A) and the 450 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Ford 2110 (A) and Lamborghini 450 DT, field by field
Field	2110 (A)	450 DT	Gap
Engine
Engine power, claimed claimed	37.4 hp	44.4 hp	+19% 450 DT
Engine declared	ISHIKAWAJIMA-SHIBAURA T-854 B	MITSUBISHI K 4 F-DT	differs
Displacement declared	2.30 L	1.49 L	+54% 2110 (A)
Maximum torque declared	90 lb·ft · 121.4 N·m	74 lb·ft · 100.2 N·m	+21% 2110 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 2110 (A)
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	8.6 gpm · 32.5 L/min	1.9 gpm · 7.1 L/min	+358% 2110 (A)
Three-point lift at ends declared	—	2,646 lb · 1,200 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	3,660 lb · 1,660 kg	2,535–2,690 lb · 1,150–1,220 kg	differs
Maximum permissible mass declared	—	5,291 lb · 2,400 kg	—
Wheelbase declared	73.4 in · 1,864 mm	66.9 in · 1,700 mm	+10% 2110 (A)
Length declared	130.7 in · 3,320 mm	119.3 in · 3,030 mm	+10% 2110 (A)
Width declared	61.4 in · 1,560 mm	49.6 in · 1,260 mm	+24% 2110 (A)
Height declared	79.9 in · 2,029 mm	79.9 in · 2,030 mm	—
Ground clearance declared	15.4 in · 390 mm	15.0 in · 380 mm	—
Turning radius, braked declared	9.5 ft · 2.90 m	10.8 ft · 3.30 m	+14% 450 DT
Fuel tank declared	42.5 qt · 40.2 L	30.6 qt · 29.0 L	+39% 2110 (A)

Source

Source