Ford 2110 (A) vs John Deere 930

10 material differences · fewer than 12

Tractor one

1983–1987

No measured PTO figure

Tractor two

1974–1977

No measured PTO figure

Which should you choose?

Read our verdict on the 2110 (A) and the 930 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 2110 (A) and John Deere 930, field by field
Field	2110 (A)	930	Gap
Engine
Engine power, claimed claimed	37.4 hp	40.5 hp	+8% 930
Engine declared	ISHIKAWAJIMA-SHIBAURA T-854 B	John Deere 3.164 DL 15	differs
Displacement declared	2.30 L	2.70 L	+17% 930
Maximum torque declared	90 lb·ft · 121.4 N·m	107 lb·ft · 145 N·m	+19% 930
Transmission
Top speed declared	18.6 mph · 30 km/h	16.8–18.6 mph · 27–30 km/h	differs
Clutch declared	—	Pedal operated, two-stage dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	8.6 gpm · 32.5 L/min	6.7 gpm · 25.4 L/min	+28% 2110 (A)
Pressure declared	—	3,481–4,496 psi · 240–310 bar	—
Three-point lift at ends declared	—	3,490 lb · 1,583 kg	—
Rear PTO speeds declared	540 rpm	—	—
Weight & dimensions
Unladen weight declared	3,660 lb · 1,660 kg	4,817 lb · 2,185 kg	+32% 930
Maximum permissible mass declared	—	7,055 lb · 3,200 kg	—
Wheelbase declared	73.4 in · 1,864 mm	74.4 in · 1,890 mm	—
Length declared	130.7 in · 3,320 mm	136.2 in · 3,460 mm	—
Width declared	61.4 in · 1,560 mm	66.5 in · 1,690 mm	+8% 930
Height declared	79.9 in · 2,029 mm	89.8 in · 2,280 mm	+12% 930
Ground clearance declared	15.4 in · 390 mm	12.8 in · 325 mm	+20% 2110 (A)
Turning radius, braked declared	9.5 ft · 2.90 m	9.6 ft · 2.92 m	—
Fuel tank declared	42.5 qt · 40.2 L	66.0 qt · 62.5 L	+55% 930

Source

Source