3 material differences · fewer than 12

Tractor oneFord 2110 (A)1983–1987No measured PTO figureTractor twoFord 26001975–1981No measured PTO figure

Which should you choose?

Read our verdict on the 2110 (A) and the 2600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

3 material differences · 8 fields identical or within 5%, which is not counted as material

Ford 2110 (A) and Ford 2600, field by field
Field2110 (A)2600Gap
Engine
Engine power, claimed claimed37.4 hp37.4 hp—
Engine declaredISHIKAWAJIMA-SHIBAURA T-854 B——
Displacement declared2.30 L——
Maximum torque declared90 lb·ft · 121.4 N·m——
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Hydraulics & hitch
Pump flow declared8.6 gpm · 32.5 L/min8.3 gpm · 31.4 L/min—
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared3,660 lb · 1,660 kg3,816 lb · 1,731 kg—
Wheelbase declared73.4 in · 1,864 mm75.8 in · 1,925 mm—
Length declared130.7 in · 3,320 mm127.0 in · 3,226 mm—
Width declared61.4 in · 1,560 mm65.5–96.1 in · 1,664–2,440 mmdiffers
Ground clearance declared15.4 in · 390 mm21.7 in · 550 mm+41% 2600
Turning radius, braked declared9.5 ft · 2.90 m9.6 ft · 2.93 m—
Fuel tank declared42.5 qt · 40.2 L51.9 qt · 49.1 L+22% 2600

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Ford 2110 (A) sources

Source
  • Source: Traktorenlexikon, “Ford 2110”

Ford 2600 sources

Source
  • Source: Traktorenlexikon, “Ford 2600”