14 material differences

Tractor oneFord 1710 (A)1983–1986No measured PTO figureTractor twoLamborghini 250 DT1992–2003No measured PTO figure

Which should you choose?

Read our verdict on the 1710 (A) and the 250 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 1710 (A) and Lamborghini 250 DT, field by field
Field	1710 (A)	250 DT	Gap
Engine
Engine power, claimed claimed	25.6 hp	24.7 hp	—
Engine declared	ISHIKAWAJIMA-SHIBAURA H-843	MITSUBISHI K3 F-D	differs
Displacement declared	1.40 L	1.12 L	+25% 1710 (A)
Maximum torque declared	56 lb·ft · 75.5 N·m	44 lb·ft · 59.8 N·m	+26% 1710 (A)
Transmission
Top speed declared	12.4 mph · 20 km/h	15.5 mph · 25 km/h	+25% 250 DT
Clutch declared	pedal-operated dry DAIKIN dual clutch	Pedal operated dry single disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	7.8 gpm · 29.5 L/min	2.2 gpm · 8.3 L/min	+255% 1710 (A)
Pressure declared	—	1,305 psi · 90 bar	—
Three-point lift, at the coupling points declared	3,814 lb · 1,730 kg	2,646 lb · 1,200 kg	+44% 1710 (A)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	2,469 lb · 1,120 kg	2,138 lb · 970 kg	+15% 1710 (A)
Maximum permissible mass declared	—	4,630 lb · 2,100 kg	—
Wheelbase declared	63.0 in · 1,600 mm	60.6 in · 1,540 mm	—
Length declared	117.3 in · 2,980 mm	105.9 in · 2,690 mm	+11% 1710 (A)
Width declared	54.3 in · 1,380 mm	44.1–50.4 in · 1,120–1,280 mm	differs
Height, over the roll bar declared	84.6 in · 2,150 mm	77.2 in · 1,960 mm	+10% 1710 (A)
Ground clearance declared	13.8 in · 350 mm	11.4 in · 290 mm	+21% 1710 (A)
Turning radius, braked declared	7.7 ft · 2.35 m	8.5 ft · 2.60 m	+11% 250 DT
Fuel tank declared	30.9 qt · 29.2 L	30.6 qt · 29.0 L	—

Source

Source