8 material differences · fewer than 12
Tractor oneFord 1620 (A)1992–1997No measured PTO figureTractor twoFord 1710 (A)1983–1986No measured PTO figure
Which should you choose?
Read our verdict on the 1620 (A) and the 1710 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 1620 (A) | 1710 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 25.6 hp | 25.6 hp | — |
| Engine declared | ISHIKAWAJIMA-SHIBAURA J-843 | ISHIKAWAJIMA-SHIBAURA H-843 | differs |
| Displacement declared | 1.33 L | 1.40 L | — |
| Maximum torque declared | — | 56 lb·ft · 75.5 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4 mph · 20 km/h | — |
| Clutch declared | Wet multi-disc clutch | pedal-operated dry DAIKIN dual clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.1 gpm · 26.8 L/min | 7.8 gpm · 29.5 L/min | +10% 1710 (A) |
| Pressure declared | 1,421 psi · 98 bar | — | — |
| Three-point lift, at the coupling points declared | 1,933 lb · 877 kg | 3,814 lb · 1,730 kg | +97% 1710 (A) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,238 lb · 1,015 kg | 2,469 lb · 1,120 kg | +10% 1710 (A) |
| Wheelbase declared | 63.0 in · 1,600 mm | 63.0 in · 1,600 mm | — |
| Length declared | 112.2 in · 2,850 mm | 117.3 in · 2,980 mm | — |
| Width declared | 48.0 in · 1,220 mm | 54.3 in · 1,380 mm | +13% 1710 (A) |
| Ground clearance declared | 11.4 in · 290 mm | 13.8 in · 350 mm | +21% 1710 (A) |
| Turning radius, braked declared | — | 7.7 ft · 2.35 m | — |
| Fuel tank declared | 28.5 qt · 27.0 L | 30.9 qt · 29.2 L | +8% 1710 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 1620 (A) sources
- Source: Traktorenlexikon, “Ford 1620”
- Source: Traktorenlexikon, “Ford 1520”
Ford 1710 (A) sources
- Source: Traktorenlexikon, “Ford 1710”