Ford 1500 (A) or International Harvester 184?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 1500 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 184 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Ford 1500 (A) suits loader and hydraulic implement work better on this data: 209% (15.9 L/min / 4.2 gpm) more hydraulic flow.
  • The Ford 1500 (A) suits heavy draft work (ploughing, cultivating) better on this data: 32% (236 kg / 520 lb) heavier and four-wheel drive.
  • The Ford 1500 (A) suits road haulage better on this data: 67% (8.0 km/h / 5.0 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 1500 (A) and International Harvester 184, with the call on each
Question1500 (A)184Call
Which puts more power through the PTO shaft?14.3 kW (19.2 hp)Traktorenlexikon, “Ford 1500”13.2 kW (17.7 hp)Traktorenlexikon, “IHC International 184”Not comparableNot comparable on power at the PTO shaft: the 1500 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 184 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 1500 (A) and the 184.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 1500 (A) and the 184.
Which pumps more oil for implements?23.5 L/min (6.2 gpm)Traktorenlexikon, “Ford 1500”7.6 L/min (2.0 gpm)Traktorenlexikon, “IHC International 184”AheadThe Ford 1500 (A) has 209% more hydraulic flow (15.9 L/min / 4.2 gpm) than the International Harvester 184 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?648 kg (1,429 lb)Traktorenlexikon, “Ford 1500”—No figureNo call on three-point lift: no figure on record for the 184.
Which is heavier, for traction?970 kg (2,138 lb)Traktorenlexikon, “Ford 1500”734 kg (1,618 lb)Traktorenlexikon, “IHC International 184”Ahead (a fact, not an advantage)The Ford 1500 (A) is 32% heavier (236 kg / 520 lb) than the International Harvester 184 (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 1500 (A) and the 184.
Which has the wider choice of gears?12Traktorenlexikon, “Ford 1500”3 to 6Traktorenlexikon, “IHC International 184”AheadThe Ford 1500 (A) has 100% more forward gears (6 gears) than the International Harvester 184 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 1500 (A) and the 184.
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “Ford 1500”12 km/h (7.5 mph)Traktorenlexikon, “IHC International 184”AheadThe Ford 1500 (A) has 67% more top speed (8.0 km/h / 5.0 mph) than the International Harvester 184 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Ford 1500”1800 rpmTraktorenlexikon, “IHC International 184”No figureNo call on PTO speeds: no standard PTO speed stated for the 184.
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the 1500 (A) and the 184.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Ford 1500”2WDTraktorenlexikon, “IHC International 184”AheadThe Ford 1500 (A) is available with four-wheel drive; the International Harvester 184 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1979–19821977–1980EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Ford 1500 (A) has 209% more hydraulic flow (15.9 L/min / 4.2 gpm) than the International Harvester 184 (both pump flow, as stated by the source).
  • The Ford 1500 (A) is 32% heavier (236 kg / 520 lb) than the International Harvester 184 (both unladen weight, as stated by the source).
  • The Ford 1500 (A) has 100% more forward gears (6 gears) than the International Harvester 184 (both forward gears, as stated by the source).
  • The Ford 1500 (A) has 67% more top speed (8.0 km/h / 5.0 mph) than the International Harvester 184 (both top speed forward, as stated by the source).
  • The Ford 1500 (A) is available with four-wheel drive; the International Harvester 184 is two-wheel drive (as stated by the sources).
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 1500 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 184 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources