Ford 1000 or URSUS C-325?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 1000 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the C-325 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The URSUS C-325 suits loader and hydraulic implement work better on this data: 13% (2.1 L/min / 0.6 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 1000 and URSUS C-325, with the call on each
Question1000C-325Call
Which puts more power through the PTO shaft?18.4 kW (24.7 hp)Traktorenlexikon, “Ford 1000”18.4 kW (24.7 hp)Traktorenlexikon, “Ursus C-325”Not comparableNot comparable on power at the PTO shaft: the 1000 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the C-325 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 1000 and the C-325.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 1000 and the C-325.
Which pumps more oil for implements?15.9 L/min (4.2 gpm)Traktorenlexikon, “Ford 1000”18.0 L/min (4.8 gpm)Traktorenlexikon, “Ursus C-325”AheadThe URSUS C-325 has 13% more hydraulic flow (2.1 L/min / 0.6 gpm) than the Ford 1000 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?770 kg (1,698 lb)Traktorenlexikon, “Ford 1000”700 kg (1,543 lb)Traktorenlexikon, “Ursus C-325”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?1,220 kg (2,690 lb)Traktorenlexikon, “Ford 1000”1,654 kg (3,646 lb)Traktorenlexikon, “Ursus C-325”Ahead (a fact, not an advantage)The URSUS C-325 is 36% heavier (434 kg / 957 lb) than the Ford 1000 (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 1000 and the C-325.
Which has the wider choice of gears?9Traktorenlexikon, “Ford 1000”6Wikipedia (pl): Ursus C-325 (open data)AheadThe Ford 1000 has 50% more forward gears (3 gears) than the URSUS C-325 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 1000 and the C-325.
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “Ford 1000”20 km/h (12.4 mph)Traktorenlexikon, “Ursus C-325”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Ford 1000”540 rpmTraktorenlexikon, “Ursus C-325”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Ursus C-325”No figureNo call on PTO independence: not stated for the 1000.
Which drives on both axles?2WDTraktorenlexikon, “Ford 1000”2WDTraktorenlexikon, “Ursus C-325”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1973–19761959–1963Ahead (a fact, not an advantage)The Ford 1000 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The URSUS C-325 has 13% more hydraulic flow (2.1 L/min / 0.6 gpm) than the Ford 1000 (both pump flow, as stated by the source).
  • The URSUS C-325 is 36% heavier (434 kg / 957 lb) than the Ford 1000 (both unladen weight, as stated by the source).
  • The Ford 1000 has 50% more forward gears (3 gears) than the URSUS C-325 (both forward gears, as stated by the source).
  • The Ford 1000 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: all two-wheel drive.
  • Not comparable on power at the PTO shaft: the 1000 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the C-325 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources