Fiat TS 90 or John Deere 2700 (A)?
Which should you choose?
The figures split: the Fiat TS 90 is ahead on hydraulic flow; the John Deere 2700 (A) is ahead on maximum permissible mass.
- The Fiat TS 90 suits loader and hydraulic implement work better on this data: 56% (26.0 L/min / 6.9 gpm) more hydraulic flow.
- The John Deere 2700 (A) suits road haulage better on this data: 25% (1,500 kg / 3,307 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | TS 90 | 2700 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 56.6 kW (75.9 hp)Traktorenlexikon, “Fiatagri TS90” | 56.5 kW (75.8 hp)Traktorenlexikon, “John Deere 2700” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the TS 90 and the 2700 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the TS 90 and the 2700 (A). |
| Which pumps more oil for implements? | 72.7 L/min (19.2 gpm)Traktorenlexikon, “Fiatagri TS90” | 46.7 L/min (12.3 gpm)Traktorenlexikon, “John Deere 2700” | AheadThe Fiat TS 90 has 56% more hydraulic flow (26.0 L/min / 6.9 gpm) than the John Deere 2700 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,294 kg (9,467 lb)Traktorenlexikon, “Fiatagri TS90” | 4,420 kg (9,744 lb)Traktorenlexikon, “John Deere 2700” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 3,929 kg (8,662 lb)Traktorenlexikon, “Fiatagri TS90” | 3,785 kg (8,344 lb)Traktorenlexikon, “John Deere 2700” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 6,000 kg (13,228 lb)Traktorenlexikon, “Fiatagri TS90” | 7,500 kg (16,535 lb)Traktorenlexikon, “John Deere 2700” | AheadThe John Deere 2700 (A) has 25% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Fiat TS 90 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “Fiatagri TS90” | 18Traktorenlexikon, “John Deere 2700” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the TS 90 and the 2700 (A). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri TS90” | 30 km/h (18.6 mph) to 35 km/h (21.7 mph)Traktorenlexikon, “John Deere 2700” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Fiatagri TS90” | 540/1000 rpmTraktorenlexikon, “John Deere 2700” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiatagri TS90” | independentTraktorenlexikon, “John Deere 2700” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri TS90” | 2WD / 4WDTraktorenlexikon, “John Deere 2700” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1997–2003 | 1993–1996 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fiat TS 90 has 56% more hydraulic flow (26.0 L/min / 6.9 gpm) than the John Deere 2700 (A) (both pump flow, as stated by the source).
- The John Deere 2700 (A) has 25% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Fiat TS 90 (both maximum permissible mass, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources