Fiat TS 110 (DT) vs New Holland TS 110 (A)

0 material differences · fewer than 12

Tractor one

1997–2003

No measured PTO figure

Tractor two

1997–2003

No measured PTO figure

Which should you choose?

Read our verdict on the TS 110 (DT) and the TS 110 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

0 material differences · 17 fields identical or within 5%, which is not counted as material

Fiat TS 110 (DT) and New Holland TS 110 (A), field by field
Field	TS 110 (DT)	TS 110 (A)	Gap
Engine
Engine power, claimed claimed	98.7 hp	—	—
Engine declared	New Holland 450 T/PD	New Holland 450 T/PD	—
Displacement declared	4.99 L	4.99 L	—
Maximum torque declared	314 lb·ft · 426 N·m	314 lb·ft · 426 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	electrohydraulically operated wet multi-plate driving clutch	—
Hydraulics & hitch
Pump flow declared	20.9 gpm · 79.0 L/min	20.9 gpm · 79.0 L/min	—
Pressure declared	2,857 psi · 197 bar	2,857 psi · 197 bar	—
Three-point lift at ends declared	7,760 lb · 3,520 kg	7,760 lb · 3,520 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,706 lb · 3,949 kg	8,706 lb · 3,949 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	13,228 lb · 6,000 kg	—
Wheelbase declared	91.7 in · 2,330 mm	91.7 in · 2,330 mm	—
Length declared	150.0 in · 3,810 mm	150.0 in · 3,810 mm	—
Width declared	85.8 in · 2,180 mm	85.8 in · 2,180 mm	—
Height declared	108.8 in · 2,763 mm	108.8 in · 2,763 mm	—
Ground clearance declared	15.7 in · 400 mm	15.7 in · 400 mm	—
Turning radius, braked declared	10.8 ft · 3.30 m	10.8 ft · 3.30 m	—
Fuel tank declared	169.1 qt · 160.0 L	169.1 qt · 160.0 L	—

Source

Source