Fiat TS 100 (DT) vs Ford 7740 (A)
4 material differences · fewer than 12
Which should you choose?
Read our verdict on the TS 100 (DT) and the 7740 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 10 fields identical or within 5%, which is not counted as material
| Field | TS 100 (DT) | 7740 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 88.8 hp | 93.7 hp | +6% 7740 (A) |
| Engine declared | New Holland 450 T/PF | FORD-POWERSTAR PA 304 CID-TC | differs |
| Displacement declared | 4.99 L | 4.99 L | — |
| Maximum torque declared | 277 lb·ft · 375 N·m | 276 lb·ft · 374 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 22.7 gpm · 86.0 L/min | — | — |
| Pressure declared | 2,857 psi · 197 bar | 2,582 psi · 178 bar | +11% TS 100 (DT) |
| Three-point lift at ends declared | 9,467 lb · 4,294 kg | 9,425 lb · 4,275 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,662 lb · 3,929 kg | 8,686 lb · 3,940 kg | — |
| Maximum permissible mass declared | 13,228 lb · 6,000 kg | — | — |
| Wheelbase declared | 91.7 in · 2,330 mm | 93.0 in · 2,362 mm | — |
| Length declared | 150.0 in · 3,810 mm | 176.3 in · 4,478 mm | +18% 7740 (A) |
| Width declared | 85.8 in · 2,180 mm | 82.5 in · 2,095 mm | — |
| Height declared | 108.7 in · 2,762 mm | 108.9 in · 2,766 mm | — |
| Ground clearance declared | 17.7 in · 450 mm | 17.0 in · 432 mm | — |
| Turning radius, braked declared | 10.8 ft · 3.30 m | — | — |
| Fuel tank declared | 169.1 qt · 160.0 L | 100.0 qt · 94.6 L | +69% TS 100 (DT) |
Fiat TS 100 (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri TS100”
Ford 7740 (A) sources
Source
- Source: Traktorenlexikon, “Ford 7740”