Fiat TN 75 D (DT) vs Lamborghini 675-75 (DT)

8 material differences · fewer than 12

Tractor one

1999–2004

No measured PTO figure

Tractor two

2004–2007

No measured PTO figure

Which should you choose?

Read our verdict on the TN 75 D (DT) and the 675-75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat TN 75 D (DT) and Lamborghini 675-75 (DT), field by field
Field	TN 75 D (DT)	675-75 (DT)	Gap
Engine
Engine power, claimed claimed	71 hp	70.0 hp	—
Engine declared	New Holland-Iveco 8035.25	SAME 1000.4 W (Tier-II)	differs
Displacement declared	2.93 L	4.00 L	+37% 675-75 (DT)
Maximum torque declared	202 lb·ft · 274 N·m	170 lb·ft · 231 N·m	+19% TN 75 D (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry single-disc clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	12.5 gpm · 47.4 L/min	9.7 gpm · 36.8 L/min	+29% TN 75 D (DT)
Pressure declared	—	3,118 psi · 215 bar	—
Three-point lift at ends declared	5,886 lb · 2,670 kg	6,460 lb · 2,930 kg	+10% 675-75 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,746 lb · 3,060 kg	5,181 lb · 2,350 kg	+30% TN 75 D (DT)
Maximum permissible mass declared	9,700 lb · 4,400 kg	—	—
Wheelbase declared	83.9 in · 2,130 mm	—	—
Length declared	156.7 in · 3,980 mm	154.3 in · 3,920 mm	—
Width declared	72.8 in · 1,850 mm	76.0 in · 1,930 mm	—
Height declared	94.5 in · 2,400 mm	92.7 in · 2,355 mm	—
Ground clearance declared	15.0 in · 380 mm	15.7 in · 400 mm	+5% 675-75 (DT)
Turning radius, braked declared	10.5 ft · 3.20 m	—	—
Fuel tank declared	74.0 qt · 70.0 L	64.5 qt · 61.0 L	+15% TN 75 D (DT)

Source

Source