1 material differences · fewer than 12

Tractor oneFiat TN-65 D (DT)1999–2004No measured PTO figureTractor twoNew Holland TN-65 D/S (A)1999–2003No measured PTO figure

Which should you choose?

Read our verdict on the TN-65 D (DT) and the TN-65 D/S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

1 material differences · 16 fields identical or within 5%, which is not counted as material

Fiat TN-65 D (DT) and New Holland TN-65 D/S (A), field by field
Field	TN-65 D (DT)	TN-65 D/S (A)	Gap
Engine
Engine power, claimed claimed	59.3 hp	59.3 hp	—
Engine declared	New Holland-Iveco 8035.05 R	IVECO 8035.05 R	differs
Displacement declared	2.93 L	2.93 L	—
Maximum torque declared	152 lb·ft · 206 N·m	152 lb·ft · 206 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Pump flow declared	—	12.5 gpm · 47.4 L/min	—
Pressure declared	2,466 psi · 170 bar	2,466 psi · 170 bar	—
Three-point lift, at the coupling points declared	5,886 lb · 2,670 kg	5,886 lb · 2,670 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,746 lb · 3,060 kg	6,746 lb · 3,060 kg	—
Maximum permissible mass declared	9,700 lb · 4,400 kg	9,700 lb · 4,400 kg	—
Wheelbase declared	83.9 in · 2,130 mm	83.9 in · 2,130 mm	—
Length declared	156.7 in · 3,980 mm	156.7 in · 3,980 mm	—
Width declared	85.0–92.5 in · 2,158–2,350 mm	85.0–92.5 in · 2,158–2,350 mm	—
Height, over the cab declared	94.5 in · 2,400 mm	94.5 in · 2,400 mm	—
Ground clearance declared	15.0 in · 380 mm	15.0 in · 380 mm	—
Turning radius, braked declared	10.5 ft · 3.20 m	10.5 ft · 3.20 m	—
Fuel tank declared	74.0 qt · 70.0 L	74.0 qt · 70.0 L	—

Source

Source