12 material differences
Tractor oneFiat TN-65 D (DT)1999–2004No measured PTO figureTractor twoMassey Ferguson MF 4220 (A)1997–2001No measured PTO figure
Which should you choose?
Read our verdict on the TN-65 D (DT) and the MF 4220 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | TN-65 D (DT) | MF 4220 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 59.3 hp | — |
| Engine declared | New Holland-Iveco 8035.05 R | Perkins 903.27 Turbo | differs |
| Displacement declared | 2.93 L | 2.50 L | +17% TN-65 D (DT) |
| Maximum torque declared | 152 lb·ft · 206 N·m | 164 lb·ft · 223 N·m | +8% MF 4220 (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pressure declared | 2,466 psi · 170 bar | 2,031 psi · 140 bar | +21% TN-65 D (DT) |
| Three-point lift, at the coupling points declared | 5,886 lb · 2,670 kg | 4,916 lb · 2,230 kg | +20% TN-65 D (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,746 lb · 3,060 kg | 5,258 lb · 2,385 kg | +28% TN-65 D (DT) |
| Maximum permissible mass declared | 9,700 lb · 4,400 kg | — | — |
| Wheelbase declared | 83.9 in · 2,130 mm | 83.9 in · 2,130 mm | — |
| Length declared | 156.7 in · 3,980 mm | 147.2 in · 3,740 mm | +6% TN-65 D (DT) |
| Width declared | 85.0–92.5 in · 2,158–2,350 mm | 78.0–90.3 in · 1,982–2,294 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 8.3 in · 210 mm | +81% TN-65 D (DT) |
| Turning radius, braked declared | 10.5 ft · 3.20 m | — | — |
| Fuel tank declared | 74.0 qt · 70.0 L | 88.8 qt · 84.0 L | +20% MF 4220 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat TN-65 D (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri TN65 D”
Massey Ferguson MF 4220 (A) sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 4220”