Fiat TN-65 D (DT) vs John Deere 2100 (A)

11 material differences · fewer than 12

Tractor one

1999–2004

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the TN-65 D (DT) and the 2100 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat TN-65 D (DT) and John Deere 2100 (A), field by field
Field	TN-65 D (DT)	2100 (A)	Gap
Engine
Engine power, claimed claimed	59.3 hp	56 hp	—
Engine declared	New Holland-Iveco 8035.05 R	ZETOR 6201	differs
Displacement declared	2.93 L	3.46 L	+18% 2100 (A)
Maximum torque declared	152 lb·ft · 206 N·m	148 lb·ft · 200 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry Zetor double clutch	—
Hydraulics & hitch
Pump flow declared	—	8.4 gpm · 31.8 L/min	—
Pressure declared	2,466 psi · 170 bar	1,160 psi · 80 bar	+113% TN-65 D (DT)
Three-point lift at ends declared	5,886 lb · 2,670 kg	6,393 lb · 2,900 kg	+9% 2100 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,746 lb · 3,060 kg	6,581 lb · 2,985 kg	—
Maximum permissible mass declared	9,700 lb · 4,400 kg	12,125 lb · 5,500 kg	+25% 2100 (A)
Wheelbase declared	83.9 in · 2,130 mm	88.8 in · 2,256 mm	+6% 2100 (A)
Length declared	156.7 in · 3,980 mm	148.0 in · 3,760 mm	+6% TN-65 D (DT)
Width declared	85.0 in · 2,158 mm	70.9 in · 1,800 mm	+20% TN-65 D (DT)
Height declared	94.5 in · 2,400 mm	103.9 in · 2,640 mm	+10% 2100 (A)
Ground clearance declared	15.0 in · 380 mm	17.0 in · 432 mm	+14% 2100 (A)
Turning radius, braked declared	10.5 ft · 3.20 m	—	—
Fuel tank declared	74.0 qt · 70.0 L	74.0 qt · 70.0 L	—

Source

Source